Περιγραφή

Επισκόπηση & Παροχή ισχύος

The Sinergy SIN6-12 represents a benchmark in compact lead-acid energy storage, utilizing proven Valve Regulated Lead-Acid (VRLA) and Absorbed Glass Mat (AGM) technology. Engineered specifically with a 3-cell architecture delivering a nominal 6.0V output, this battery is manufactured for critical applications that demand consistent voltage stability, low internal resistance, and long-term electrochemical durability. The internal lead-calcium-tin grids are formulated to resist corrosion and minimize gassing, providing an extended design float life of up to 5 years under standard operating temperatures (20°C to 25°C).

At the core of the SIN6-12 is its high-compression micro-porous glass fiber matting, which fully absorbs and immobilizes the diluted sulfuric acid electrolyte. This dry-cell style architecture prevents stratification, eliminates acid leakage, and guarantees safe operation across virtually any orientation. Integrated one-way self-resealing rubber pressure relief valves (PRVs) release excess internal pressure during inadvertent overcharging while preserving a 99% internal gas recombination efficiency during standard service.

Mechanical integrity is reinforced through an impact-resistant, non-conductive ABS resin casing engineered to absorb high levels of mechanical shock, road vibration, and physical stress. The rugged terminal posts utilize standard Faston F1/F2 spade connections, providing low contact resistance and ensuring clean, uninterrupted power delivery for both high-rate short-duration discharges and extended slow-draw cycles.

Τεχνικές προδιαγραφές

Συμβατότητα οχημάτων και απαιτήσεις συστήματος Start-Stop

While modern passenger vehicles utilize 12V or 48V electrical networks with advanced Start-Stop micro-hybrid systems, the Sinergy SIN6-12 6V 12Ah power pack addresses dedicated low-voltage vehicular, powersports, and industrial applications. It is widely employed in vintage motorcycles, classic scooters, historic mopeds, and retro automotive electrical systems engineered around a 6V chassis. In these heritage platforms, the battery supplies essential cranking energy and powers ignition coils, headlamps, and instrumentation without boiling or weeping electrolyte onto delicate body panels.

Modern Start-Stop passenger automobiles require heavy-duty 12V AGM or EFB starter batteries to sustain repeated engine restart cycles and handle massive dynamic charge acceptance. The 6V SIN6-12 is not built for primary 12V start-stop engine cranks; however, it is frequently utilized in custom secondary auxiliary circuits, high-reliability telemetry hardware, uninterrupted back-up memory modules, emergency lighting packs, security alarm systems, electric wheelchairs, and 6V children ride-on vehicles. Furthermore, two identical SIN6-12 units can be connected in electrical series (6V + 6V) to produce a 12V 12Ah power bank tailored for split battery trays where a standard monolithic 12V case will not physically fit.

Οδηγίες εγκατάστασης και φροντίδας

Installing the Sinergy SIN6-12 is straightforward due to its maintenance-free, fully sealed design. Prior to installation, ensure the mounting tray is clean and free of abrasive debris. Align the polarity strictly: red indicates the positive (+, 6V) terminal, and black indicates the negative (-, Ground) terminal. Firmly push matching female Faston crimp connectors onto the F1 or F2 terminals to establish solid mechanical and electrical mating. Loose connections introduce excessive resistance, leading to localized heating and voltage drop.

For optimal service life, maintain precise charging parameters. When used in float/standby service, configure your charger between 6.75V and 6.90V at 25°C. For deep cyclic service, set the absorption charge voltage between 7.20V and 7.50V, limiting the maximum initial inrush current to 3.6A (0.3C). Avoid completely depleting the battery below 5.25V (1.75V per cell), as deep over-discharge initiates irreversible lead sulfate crystallization. If storing the unit long-term, recharge it fully beforehand and provide a freshening boost charge every six months to prevent capacity loss.

Συχνές Ερωτήσεις (FAQ)

Can the Sinergy SIN6-12 be installed directly in a 12V Start-Stop car?

No. A standalone SIN6-12 provides 6V nominal potential, whereas modern passenger Start-Stop vehicles operate strictly on a 12V system. Connecting a 6V battery directly to a 12V automotive starter circuit will cause severe electrical malfunction. However, two SIN6-12 batteries connected in series create a 12V 12Ah pack suitable for specific 12V backup and auxiliary equipment.

What does 3 cells per unit mean for the battery voltage?

In standard lead-acid electrochemistry, each individual cell produces a nominal potential of 2.0 volts. Because the Sinergy SIN6-12 contains exactly 3 cells per unit connected internally in series, its nominal voltage is 6.0 volts (3 cells x 2.0V = 6V).

What is the difference between Faston F1 and F2 terminals?

Faston F1 terminals feature a blade width of 4.75 mm (0.187 inches), while Faston F2 terminals measure 6.35 mm (0.250 inches). Both are standard quick-disconnect slide tabs. Adapters and dual-fit leads are commonly available to match existing vehicle or appliance wiring harnesses.

Can this VRLA AGM battery be mounted on its side?

Yes. Because the electrolyte is fully absorbed into fine glass fiber separators and the battery casing is sealed with automatic resealing pressure valves, the SIN6-12 can be mounted upright or on either side without risk of acid leakage or loss of capacity. It should not, however, be mounted inverted (upside down).

How should I maintain this battery during winter storage?

Because the SIN6-12 is sealed and valve-regulated, no water replenishment is required. For winter storage, remove the battery from parasitic loads, store it in a cool and dry location, and connect it to a regulated 6V smart float maintainer or apply a maintenance charge once every 4 to 6 months.

Επιπλέον πληροφορίες