Περιγραφή

Επισκόπηση & Παροχή ισχύος

The Yuasa YTX14H-BS represents the pinnacle of powersports energy storage engineering, developed specifically for large displacement motorcycles, high-compression twins, performance scooters, and demanding adventure touring rigs. Operating at a nominal 12 volts via six precision-engineered 2.0V lead-acid cells, this high-performance AGM (Absorbed Glass Mat) battery is rated at 240 Cold Cranking Amps (CCA) with a 12Ah 10-hour capacity. This provides up to 30% more cranking power than standard factory-installed batteries of equivalent case dimensions, ensuring immediate turnover even in cold weather and under extreme thermal loads.

Internally, the YTX14H-BS employs heavy-duty lead-calcium alloy radial grids that significantly lower internal resistance (IR) while drastically reducing water consumption and grid growth. The micro-porous glass fiber separators compress tightly between the positive and negative plates, absorbing all liquid electrolyte. This recombinant VRLA (Valve-Regulated Lead-Acid) architecture eliminates acid stratification, maintains peak active material adhesion, and allows for clean, completely spill-proof operation once the included acid pack is installed and permanently sealed.

Harsh vibrations and severe mechanical harmonics are among the primary causes of premature battery failure in heavy V-twins and off-road adventure bikes. The YTX14H-BS counteracts this vulnerability with reinforced polypropylene outer casing walls, molded internal ribbing, and fully bonded cell connectors that exceed OE shock absorption standards. The result is a robust, long-lasting power pack designed to withstand punishing off-road terrain, long-distance highway heat cycles, and deep high-current starter draws without plate shedding or internal shorting.

Τεχνικές προδιαγραφές

Συμβατότητα οχημάτων και απαιτήσεις συστήματος Start-Stop

Modern motorcycles and maxi-scooters integrate complex electrical architecture, including CAN-bus communications, multi-stage electronic fuel injection (EFI), ABS pumps, dynamic suspension adjusters, heated grips, and advanced GPS units. The Yuasa YTX14H-BS delivers stable voltage plateaus, protecting sensitive microelectronics from inductive voltage spikes and severe drop-outs during ignition initiation.

This battery is precision engineered to fit a wide catalog of motorcycles including high-demand applications from Aprilia (Dorsoduro 750/900/1200, Caponord 1000/1200, Mana 850/GT, Shiver 750/900, SL Falco), BMW (F650GS, F700GS, F800 series, HP2 Sport, K1200R/S, K1250GS, K1300R/S, R nineT platform, R1200GS/S/ST/RS/R, and R1250GS/Adv/RT/R/RS), Buell Blast 500, Honda (GL1500 Valkyrie, ST1100 series, VT1100 Shadow models, VT750 Shadow, and VTX1300 series), Husqvarna (NUDA900, TE410E, TE610E, SM610S), Hyosung (GT250/R, GT650/R/S), Indian FTR 1200, Kawasaki (Ninja ZX-12R, ZX-14R, Vulcan VN800, W650, ZG1400 Concours, ZRX1100, ZRX1200R, ZX-11, GPz1100, ZZR1200), KTM (1290 Super Duke R/EVO), Moto Guzzi (V7 series, V7 III), Royal Enfield (Classic/Meteor 350, Interceptor 650, Continental GT 650), Suzuki (DL1000 V-Strom, GSX1100G, SV1000/S), Triumph (Daytona 955i, Speed Triple, Sprint ST/GT/RS, Tiger 800/900/955/1050, Trophy 1200), and Yamaha (FZR1000, YZF1000R).

It also provides premium reliability for performance scooters such as Aprilia SRV850, BMW C600 Sport, BMW C650 GT/Sport, Kymco Xciting 500i, Piaggio (BV250, BV500, MP3 250/400/500 Sport, X9), Piaggio-Gilera (Nexus 300ie, Runner 125), Piaggio-Vespa GTV250, and Suzuki AN650 Burgman.

Οδηγίες εγκατάστασης και φροντίδας

Activation of the Yuasa YTX14H-BS requires following proper AGM procedures to achieve maximum cycle life. Remove the foil tape covering the battery filling ports, place the included 0.69L acid bottle pack upside-down into the ports, and press down evenly to puncture the seals. Allow the battery to stand unsealed for at least 30 to 60 minutes after the electrolyte fully drains. This critical standing period lets the micro-glass fleece absorb the electrolyte and allows chemical degassing to normalize.

Prior to permanent sealing with the sealing strip, it is recommended to top-off charge the battery using a dedicated smart multi-stage AGM charger at a standard rate of 1.2 Amps until the resting open-circuit voltage measures 12.8V or higher. Once the sealing strip is driven flush into the top cover, the battery is permanently sealed and must never be opened again. Coat terminal bolts with dielectric grease to prevent surface oxidation, and maintain state-of-charge with an AGM-specific trickle charger during prolonged winter storage.

Συχνές Ερωτήσεις (FAQ)

Is the Yuasa YTX14H-BS battery completely sealed and maintenance-free?

Yes. Once activated using the included pre-measured acid pack and sealed with the permanent strip, the battery operates as a sealed VRLA (Valve-Regulated Lead-Acid) AGM unit. It requires zero water replenishment throughout its operating life.

Can the YTX14H-BS replace a standard YTX14-BS battery?

Yes. The YTX14H-BS shares the identical physical dimensions (150 x 87 x 145 mm) as the standard YTX14-BS, but delivers increased cranking power (240 CCA compared to 200 CCA) for easier starting on high-displacement engines.

What initial charging procedure is required before first use?

After introducing the electrolyte and letting the battery stand for 30 to 60 minutes, charge the battery at 1.2A using an automatic AGM-compatible charger until fully charged (12.8V+ resting voltage) before installation.

How does AGM technology resist vibration better than conventional batteries?

AGM technology features tightly compressed fiberglass mat separators that hold the acid in place and support the lead plates firmly inside the cell cavities, preventing mechanical plate deflection and internal plate shorts caused by motorcycle vibrations.

What should I do to maintain this battery during off-season winter storage?

Disconnect the negative terminal or remove the battery from the vehicle, clean the terminals, and attach an automatic multi-stage AGM battery tender or maintainer to keep the resting open-circuit voltage above 12.6V.

Επιπλέον πληροφορίες