Beschreibung

Übersicht & Stromversorgung

The Exide AGM12-12 12V 12Ah 200EN is a premium, factory-sealed Absorbent Glass Mat (AGM) battery engineered specifically for motorcycles, scooters, ATVs, side-by-sides, and compact utility engines that demand uncompromising electrical performance. At the core of the AGM12-12 design is an ultra-dense, micro-porous glass fiber mat separator structure that completely absorbs and immobilizes the liquid electrolyte. By trapping the acid against the high-purity lead plates under uniform mechanical compression, this AGM architecture completely eliminates free liquid acid, providing a 100% spill-proof and leak-proof configuration capable of operating at extreme tilt angles and severe incline inclinations.

From an electrochemical engineering perspective, the battery features heavy-duty calcium-tin alloy expanded metal grids. This specialized metallurgical composition significantly reduces internal electrical resistance while mitigating plate shedding and water consumption during elevated float-charge voltages. The low internal resistance translates directly into instant kinetic power delivery, unleashing a formidable 200 Cold Cranking Amps (EN) on demand. Whether you are executing a cold start in sub-zero alpine conditions or turning over a high-compression V-twin or multi-cylinder engine in blistering summer heat, the Exide AGM12-12 maintains steady terminal voltage, preventing transient voltage drops that can destabilize sensitive engine control units (ECUs).

Cyclic durability and structural resilience are paramount in high-revving and harsh terrain powersport environments. The Exide AGM12-12 incorporates high-impact polypropylene casing reinforced with internal bracing that dampens extreme engine harmonics, severe road shocks, and continuous off-road vibration. This tightly packed internal cell stack prevents mechanical plate deformation and active material delamination, delivering up to three times the cycle life and vibration resistance of conventional flooded motorcycle batteries.

Technische Daten

Fahrzeugkompatibilität und Anforderungen an Start-Stopp-Systeme

Modern motorcycles and powersport vehicles are no longer basic mechanical systems; they are sophisticated mobile networks equipped with integrated CAN-bus electronic architecture, anti-lock braking systems (ABS), traction control modules, dynamic electronic suspension, heated grips, high-output LED arrays, and satellite navigation systems. The Exide AGM12-12 is engineered to support these intense parasitic and operational electrical loads without compromising starting reserves. Its rapid dynamic charge acceptance enables the battery to absorb charge quickly from modern small-displacement alternators and compact stator charging systems, even during frequent low-speed urban commutes or repetitive short journeys.

In micro-hybrid, start-stop scooters and start-stop auxiliary systems, standard flooded batteries rapidly degrade due to acid stratification and active plate shedding caused by frequent engine restart cycles. The compressed AGM separators in the Exide AGM12-12 prevent acid settlement entirely, ensuring consistent chemical density across the full height of the plates. This makes it an ideal upgrade or direct OEM replacement for premium sport touring motorcycles, adventure bikes, maxi-scooters, and specialty performance watercraft requiring robust dynamic recharge and dependable multi-start resilience.

Anleitung zur Installation und Pflege

To extract peak service life and optimal electrical conductivity from your Exide AGM12-12, professional installation standards should be followed. Prior to installation, always verify circuit polarity. Begin by thoroughly cleaning the vehicle cable terminal lugs to bare metal using a brass wire brush, eliminating any existing copper or lead oxide films. Mount the battery securely inside the battery tray, ensuring all vibration-damping rubber cushions are intact to minimize transmitted chassis resonance. Secure the terminal bolts to manufacturer torque specifications (typically 4.0 to 5.0 Nm); over-tightening can fracture the lead terminal collar, while under-tightening creates electrical resistance that produces localized overheating and starting failure.

Because the Exide AGM12-12 is a sealed VRLA AGM unit, it never requires distilled water replenishment; attempting to pry open the top sealing strip will permanently damage the internal vacuum seal and void the product integrity. For seasonal storage or extended periods of vehicle inactivity, parasitic electrical draws can discharge the battery into deep sulfation territory. Disconnect the negative ground lead or connect an intelligent, AGM-specific microprocessor-controlled battery maintainer. Maintain the battery at an optimal float voltage between 13.5V and 13.8V at 20 degrees Celsius. Never use an unregulated automotive fast-charger exceeding 1.2 Amps (10% of nominal capacity), as uncontrolled overcharging can vent internal gas through the safety valve, leading to irreversible dry-out of the glass mat electrolyte.

Zusätzliche Informationen