Beschreibung

Übersicht & Stromversorgung

The Sinergy SIN12-22-S is an industrial-grade, 6-cell Valve Regulated Lead Acid (VRLA) Absorbed Glass Mat (AGM) battery engineered to deliver uncompromising electrochemical stability, continuous power output, and exceptional cyclic durability. Designed with a true 12V nominal output derived from six balanced 2.0V galvanic cells, this high-performance energy cell excels in demanding operating environments ranging from auxiliary automotive circuits and powersports starting to deep-cycle mobility units and mission-critical uninterruptible power supply (UPS) systems.

Internally, the SIN12-22-S integrates ultra-thin, highly absorbent glass micro-fiber separators that firmly suspend the electrolyte adjacent to high-purity lead-calcium grid matrices. This advanced AGM configuration optimizes ion transfer kinetics while reducing internal electrical resistance (IR), providing instantaneous pulse discharge capabilities when cranking small displacement engines or powering transient electrical loads. The recombination design enables over 99% internal gas recombination during typical float operations, completely eliminating the need for periodic water top-ups and rendering the battery virtually maintenance-free throughout its operating life.

Vibration resistance is another hallmark of the SIN12-22-S engineering standard. Plate packs are compressed tightly within reinforced, flame-retardant ABS casing compartments to prevent plate shedding, mechanical distortion, and premature degradation caused by continuous road shock, engine harmonics, or rough terrain. Combined with premium lead-alloy grids that actively mitigate grid corrosion, the Sinergy SIN12-22-S boasts an exceptionally low self-discharge profile, retaining sufficient capacity to be safely stored for more than six months at 25°C before requiring a maintenance freshening charge.

Technische Daten

Fahrzeugkompatibilität und Anforderungen an Start-Stopp-Systeme

Modern electrical architectures place unprecedented stress on secondary and primary battery systems. While the Sinergy SIN12-22-S is not designed as a heavy-duty under-hood starter battery for large multi-cylinder combustion engines, its compact 181x77x167 mm footprint and 22Ah capacity make it a prime choice for small powersports starters, riding lawn tractors, golf carts, electric wheelchairs, medical mobility scooters, gate operators, and specialized utility vehicles. In these setups, its AGM glass mat construction prevents acid stratification, ensuring peak amperage delivery even under erratic duty cycles.

Furthermore, this battery is extensively utilized as an auxiliary backup module within modern automotive platforms equipped with advanced Start-Stop systems and complex on-board telematics. Vehicles utilizing decentralized power distribution networks rely on secondary 12V AGM auxiliary cells to support steering sensors, emergency braking servos, cabin infotainment, and transmission shift actuators during engine-off coasting or stop-light intervals. The rapid charge acceptance of the SIN12-22-S enables it to quickly replenish energy reserves via the alternator during brief driving phases, guarding critical vehicle ECUs against voltage sag.

Anleitung zur Installation und Pflege

Ensuring maximum longevity from your Sinergy SIN12-22-S battery requires proper handling and clean physical integration. Mount the battery in a secure, well-ventilated enclosure using non-conductive brackets that accommodate its 181 x 77 x 167 mm profile. While the non-spillable VRLA AGM architecture permits installation in upright or side-lying orientations, inverted mounting (terminals facing down) should be strictly avoided. Ensure the Faston Tab F13 terminals are clean, dry, and securely fastened using compatible female slip-on connectors to prevent high-resistance contact points that cause localized thermal buildup.

To maintain peak health, always configure your charging hardware to AGM/VRLA voltage profiles. For constant standby and float charging applications, regulate the supply voltage between 13.7V and 13.9V at 25°C. When deploying the battery in cyclic environments, maintain bulk/absorption voltages between 14.4V and 14.8V, never exceeding 15.0V without active temperature compensation. If storing the battery off-grid or over winter months, store it in a cool, dry area at or below 25°C. With its superior shelf life exceeding six months without recharge, simply top up the state of charge using a smart multi-stage battery maintainer prior to seasonal redeployment.

Häufig gestellte Fragen (FAQs)

What terminal type is fitted to the Sinergy SIN12-22-S?

The battery is equipped with heavy-duty Faston Tab F13 push-on spade terminals, designed for secure high-current connectivity in industrial, mobility, and standby equipment harnesses.

Is this battery sealed and maintenance-free?

Yes. The Sinergy SIN12-22-S utilizes sealed Valve Regulated Lead Acid (VRLA) AGM construction with internal oxygen recombination, meaning it never requires electrolyte inspection or distilled water replenishment.

What is the proper float charging voltage for standby use?

For standby, buffer, or emergency backup configurations, the recommended float charging voltage is 13.7V to 13.9V at an ambient temperature of 25°C.

How long can the battery be stored without discharging completely?

Thanks to low-antimony, high-purity lead-calcium grid metallurgy, this battery exhibits an exceptionally low self-discharge rate and can be stored for more than 6 months at 25°C before an equalization charge is required.

Can the Sinergy SIN12-22-S replace traditional flooded batteries?

Yes, provided the physical dimensions (181x77x167 mm) and F13 terminal specifications match. Its AGM chemistry offers superior cyclic life, higher vibration tolerance, and complete leak-proof safety compared to conventional flooded designs.

Zusätzliche Informationen